• Drum Screener Machine
  • Drum Screener Machine
  • Drum Screener Machine
  • Drum Screener Machine

Drum Screener Machine

Rotary screen is a common equipment in the production of compound fertilizer, which is mainly used for the separation of finished products and reclaimed materials, and can also realize the classification of products, so that the finished products can be e
 
Model: GS1.0×3.0/GS1.2×4.5/GS1.5×5.0      
 
Motor Power: 1-3/3-5/5-10
Share With:
Details
Video
Parameters
Inquiry
Related Products
Details
INTRODUCTION
The drum screener machine is usually used in all kinds of fertilizer production line.And sometimes the machine can be equipped with two sets in a large fertilizer production line. Drum screener machine is a common equipment in the production of compound fertilizer, which is mainly used for the separation of finished products and reclaimed materials, and can also realize the classification of products, so that the finished products can be evenly classified. The machine adopts a combined screen for easy maintenance and replacement. It has the advantages of simple structure, convenient operation and smooth operation. It is an ideal equipment for the production of compound fertilizer.

ADVANTAGE
1. Smooth operation and low noise;
2. The machine has high reliability and less one-time investment;
3. The material is not easy to block the sieve hole;
4. The screening cylinder can be closed,can be opened and the sealing is easy to close and collect dust;
5. Simple structure and convenient maintenance;
6. Adopt special screen,high screening efficiency and long service life.
 
STRUCTURE
This drum screener machine can divided into three parts:
1. Rack part: The machine frame is welded by high carbon steel plate and channel steel, and through strict product certification and specific technical requirements, it has reached the purpose of the machine.
2. Transmission and screening part: This part uses a combined screen mesh, which is transmitted through a coupling to the main shaft by a transmission wheel, which is installed and welded on the roller cage of the main shaft. The material is entered from the feed end, and the roll cage is continuously turned and graded, and the outlet is outflow evenly from the bottom, which effectively separations the finished product from the Re-material, thus improving the working efficiency.
3. Transmission connection part: The motor drives the pulley, the triangle belt and the reducer to make the spindle rotating. In which the drive reducer and the main working part of the main engine are driven by the axle pin couple, it is convenient to assemble and maintain.
 
Video
Parameters
Model Barrel Rotation Speed Inclination Power Capacity Dimensions Weight
Diameter Length L× W × H
mm mm r/min 0 kW t/h mm tons
GS1.0×3.0 1000 3000 22 2-2.5 2.2 1-3 3500×1400×2200 1.5
GS1.2×4.5 1200 4500 17 2-2.5 3.0 3-5 5700×1600×2400 2.5
GS1.5×5.0 1500 5000 14 2-2.5 5.5 5-10 6860×1900×2810 3.8
GS1.0×3.0 1000 3000 22 2-2.5 2.2 10-20 3500×1400×2200 1.5
GS1.6×6.0 1600 6000 12 2-2.5 7.5 10-20 7300×2000×3000 4.7
GS1.2×4.0 1200 4000 16 2-2.5 3.0 20-25 5200×600×2360 2.3
GS1.8×6.5 1800 6500 11.5 2-2.5 7.5 20-25 9000×2200×3200 6.0
Inquiry
Note:We promise that the personal information(name, telephone number, email address )you leaved will get the protection, and will never used for other methods. For details, please see the privacy policy.
Company name:
* Email:
* Phone:
Address:
* Content: